» Block and multi-point lock (on four sides) for European cylinder.

» European cylinder lock (10 teeth) and latch.

» A central dead lock of 40 x 60 x 13 mm

» The stroke of the central dead bolt is 40 mm.

» Keyhole: 60 mm; centre distance: 82.5 mm; square: 8 mm.

» Top, back and bottom anchoring points, 18 mm in Ø.

» An additional deviator mechanism at 700 mm to the bottom from the central housing, dead bolt of 25 x 60 x 13 mm, stroke 25 mm. And no bottom anchoring.

» Two additional deviators at 700 mm, one towards the top and one towards the bottom from the central housing, dead bolt of 25 x 60 x 13 mm, stroke 25 mm.

Burglar resistant doors, Standards EN 1627 Class 4 with a 3-point locking mechanism. The E series doors is the most adaptable to the whole range of possibilities offered by armoured steel doors, fireproof or not. Our main developments and technical innovations are devoted to the E series wich moreover, underwent the greatest number of tests, against burglary (CNPP, CEPTB : norm NFP 20-320 level 2 and NFP 23-306, test report n° MP 950208 A), fire resistance test (according to norm : NBN 713-020 official report N°4/EF/58.260/GF/712, and 4/EF/58.675/GF/727), BENOR ATG certificate n°TCC1-024. Most of our patents are applied to these doors. A series of doors of simple design but high performance, with extensive potential for adapting to your requirements. This series earned class 4 in burglar resistance tests according to Standards EN 1627 with a 3-point locking mechanism, acoustic insulation – 42 db.

» Door with one or two steel leaves, with covering on three sides, ±60 mm in thickness, consisting of a solid, double-wall panel, made of two zinc plated steel sheets with a thickness of 15/10 per leaf. The internal insulation consists of high density rock wool.

» U shaped with wall head covering.

» A frame that sandwiches the wall head will be used for most interior doors. The frame is made of zinc plated steel sheets with a thickness of 20/10. It is screwed to the bay with at least three screws per stile.

» Tubular frame

» When the wall has a door rabbet, the most suited solution is a tubular frame housed in the interior space of the bay. This type of frame is made of section tubes of minimum 60x60x3.

» The leaves are suspended from the frame by means of at least two welded steel hinges with an exterior diameter of 20 mm; they are mounted on ball bearings for great inertia and can open up to 180°. They are moreover designed so that the axle cannot be driven out.